Home
Back
Torque Formula with Crow's Foot Extension:
| From: | To: |
Torque calculation with crow's foot extension accounts for the additional length added to a torque wrench when using this common tool attachment. It's essential for achieving accurate torque values in tight spaces where direct wrench application isn't possible.
The calculator uses the torque equation with extension:
Where:
Explanation: The crow's foot extension effectively increases the lever arm length, requiring less force to achieve the same torque compared to the wrench alone.
Details: Accurate torque application is critical in mechanical assembly to ensure proper fastener tension, prevent under/over tightening, and maintain joint integrity. When using extensions, standard torque wrench settings become inaccurate without correction.
Tips: Enter force in newtons, radius in meters, and extension length in meters. All values must be positive numbers. The calculator will compute the actual torque applied at the fastener.
Q1: Why does crow's foot affect torque?
A: The extension changes the effective lever arm length, altering the torque applied at the fastener for a given wrench setting.
Q2: How should I position the crow's foot?
A: For most accurate results, the crow's foot should be at 90° to the torque wrench handle. Other angles require trigonometric correction.
Q3: What's a typical crow's foot extension length?
A: Common crow's foot extensions range from 25mm to 100mm (0.025m to 0.1m), but always measure your specific tool.
Q4: Can I use this for torque adapters too?
A: Yes, the same principle applies to any extension that changes the effective lever arm length of your torque wrench.
Q5: How precise should my measurements be?
A: For critical applications, measure extension length to within ±1mm. Radius should be the actual wrench length from center of drive to center of grip.